DynaPlast® TS RH-30 & TS RH-30 Buff (Heat Resistant)
DynaPlast® TS RH-30 is a high strength alkaline based alpha hemihydrate gypsum plaster with good heat resistance and self-leveling properties.
Typical applications include architectural mantels and fireplace surrounds where good heat resistant properties are required.
DYNAPLAST® TS RH-30 TYPICAL PHYSICAL PROPERTIES:
Use Consistency – 25-26 cc/100g
Set Time – 6-9 minutes
Maximum Expansion (%) – 0.20%
24 Hr. Compressive Strength – 12,000 psi
GENERAL MIXING INSTRUCTIONS:
When mixing with 50% by weight using fine sand, add 4cc/100 grams of water to the mix.
It is not recommended to exceed the 50% upper limit on aggregate addition because excess aggregate can settle out of the slurry.
Products must be mixed with high-shear mixing equipment.