DynaPlast® Stone Mix & Stone Mix RH 2017-10-03T15:30:06+00:00

DynaPlast® Stone Mix & Stone Mix RH

DynaPlast® Stone Mix is a polymer modified high strength alpha-based gypsum formulation that can be mixed neat or aggregated with fine sands and other materials to produce solid cast gypsum pieces that are strong, resilient, with a very hard surface.

Stone Mix has good self-leveling characteristics that make it easy to cast panels, tiles, plaques, fireplace surrounds or other open mould pieces.

Stone Mix RH has been combined with a calcination inhibitor that improves heat tolerance for higher temperature applications such as fireplace surrounds.

STONEMIX TYPICAL PHYSICAL PROPERTIES:

Pouring Consistency – 22-23 cc/100 grams
Set Time – 20- 30 minutes (vicat set)
Maximum Expansion (%) – 0.12%
Dry Density – 118.15 lb./cu.ft3 (neat)
Dry Compressive Strength – 12,000 psi

STONEMIX RH TYPICAL PHYSICAL PROPERTIES:

Pouring Consistency – 23-24 cc/100 grams
Set Time – 20- 30 minutes (vicat set)
Maximum Expansion (%) – 0.12%
Dry Density – 118.15 lb./cu.ft3 (neat)
Dry Compressive Strength – 12,000 psi

GENERAL MIXING INSTRUCTIONS:

When mixing with 50% by weight using fine sand, add 4cc/100 grams of water to the mix.

It is not recommended to exceed the 50% upper limit on aggregate addition because excess aggregate can settle out of the slurry.

Products must be mixed with high-shear mixing equipment.

Support Documents

Safety Data Sheet

Safety Data Sheet (SDS) for the following products:

Dynaplast® Stone Mix & Dynaplast® Stone Mix RH
Safety Data Sheet

Product Data Sheet for Dynaplast® Stonemix

Product Data Sheet
Product Data Sheet

Product Data Sheet for Dynaplast® Stonemix RH

Product Data Sheet
Product Data Sheet

To Purchase This Product Please Contact

ACG Materials can create custom blended plasters and cements.