Dynaplast® Anchoring Cement
DynaPlast® Anchoring Cement is expansive, high strength alkaline based gypsum cement used for a variety of anchoring and other applications where high early strength and density are important.
ANCHORING CEMENT TYPICAL PHYSICAL PROPERTIES:
- Use Consistency – 25-26 cc/100g
- Set Time – 6-9 minutes
- Maximum Expansion (%) – 0.20%
- 24 Hr. Compressive Strength – 12,000 psi
GENERAL MIXING INSTRUCTIONS:
When mixing with 50% by weight using fine sand, add 4cc/100 grams of water to the mix.
It is not recommended to exceed the 50% upper limit on aggregate addition because excess aggregate can settle out of the slurry.
Products must be mixed with high-shear mixing equipment.
To purchase this product please contact: