AccuQuiet® C40 Jim Madsen
AccuQuiet® C40 is a member of the AccuQuiet® Sound Control System family of products and is comprised of a water-tight technical fabric that is bonded to a flexible, UV stabilized, polypropylene monofilament mesh.
The “cuspated” geometry of the monofilament grid is engineered to deliver the highest level of IIC and STC improvement, with minimal loss in compression resistance.
AccuQuiet® C40 is loose-laid over the subfloor and then covered with a uniform thickness of AccuCrete® Pourable Underlayment.
No mechanical fastening is required, and the total minimum thickness of 1 1/2“ (38.1mm) with no reinforcement, and a minimum thickness of 1” (25.4mm) with reinforcing lath.
When used with Brand Floor Underlayments, impact noise (IIC) can be reduced up to 16 dB in wood frame and 20 dB in concrete assemblies, and with STC improvement of up to 9 dB in wood frame.
Refer to the Sound Mat Brochure Guide for acoustical test performance data.
Low profile, 3/8” (8.5 mm) thickness.
Cost-effective noise reduction for new and renovation construction.
Effective noise control with an endless variety of hard surface floors.
Flexible and resilient, with excellent compression resistance.
Because is permanently imbedded in the floor-ceiling assembly, noise problems are reduced, even after floor coverings are changed or replaced.
Full breadth of floor covering options available, including tile, stone, marble, ceramic, and glue-down or floating hardwood…without sacrificing sound control.